NUX Brownie Distortion

New product

NUX Brownie Distortion

Detaljnije

RSD4.990,00

Add to wishlist

Više informacija

By using a hybrid of circuits, we created truly unique pre-amp and power tube distortion characteristics. You’ll be amazed to hear the warm, organic tone that’s reproduced.

Brownie has a specially designed BJT input stage causing it to “break-up” when the preamp tube starts to distort.   It also has an asymmetrical clipping circuit letting you simulate some of the characteristics of an actual tube amplifier.  It also keeps the bottom-end tight by processing bass frequencies which can get muddy when distorted.

Nux Brownie uses a low-pass tone control filter to simulate the Variac effect (by lowering the voltage going into the amplifier) for rounding-off your tone. The range of tone is controlled yet perfect for dialing-in the high-end response.

The power clipping circuit is crafted from a modern low-noise op-amp and 2 red LEDs. It can create symmetrical clipping that distorts both halves of the signal keeping the sound smooth. True bypass circuits with a high quality TPDP mechanical foot-switch gives the bypass its phenomenal signal clarity.

●Input Impedance                470K ohm
●Output Impedance              100 ohm
●Power Input                        Standard 9V DC, center negative >100mA (power supply not included)
●Weight                               174g/ 6 oz
●Dimensions                        94(L)×51(w)×53(H)mm | 3.7(L)×2.0(W)×2.08(H)inches

Kritike

Napišite kritiku

NUX Brownie Distortion

NUX Brownie Distortion

NUX Brownie Distortion

NUX Brownie Distortion <p><span>By using a hybrid of circuits, we created truly unique pre-amp and power tube distortion characteristics. You’ll be amazed to hear the warm, organic tone that’s reproduced.</span></p> <p><span>Brownie has a specially designed <span>BJT input stage</span> causing it to “break-up” when the preamp tube starts to distort.   It also has an<span> asymmetrical clipping circuit</span> letting you simulate some of the characteristics of an actual tube amplifier.  It also keeps the bottom-end tight by processing bass frequencies which can get muddy when distorted.</span></p> <p><span>Nux Brownie uses a low-pass tone control filter to simulate the Variac effect (by lowering the voltage going into the amplifier) for rounding-off your tone. The range of tone is controlled yet perfect for dialing-in the high-end response.</span></p> <p><span>The power clipping circuit is crafted from a modern low-noise op-amp and 2 red LEDs. It can create symmetrical clipping that distorts both halves of the signal keeping the sound smooth. <span>True bypass</span> circuits with a high quality TPDP mechanical foot-switch gives the bypass its phenomenal signal clarity.</span></p> <p></p> <dl><dt>●Input Impedance                470K ohm</dt></dl><dl><dt>●Output Impedance              100 ohm</dt></dl><dl><dt>●Power Input                        Standard 9V DC, center negative &gt;100mA (power supply not included)</dt></dl><dl><dt>●Weight                               174g/ 6 oz</dt></dl><dl><dt>●Dimensions                        94(L)×51(w)×53(H)mm | 3.7(L)×2.0(W)×2.08(H)inches</dt></dl>
RSD4.990,00